Jiffy® is the #1, fastest, smoothest cutting Ice Drill on the market.

Jiffy® has the best warranty and service available in the industry.  All Jiffy® Power Ice Drills purchased between 10/1/16 and 8/31/18 have a 5-year warranty period from the date of purchase.  If you didn't purchase your Jiffy® Power Ice Drill between 10/1/16 and 8/31/18, you will have a 2-year warranty period from the date of purchase.  For all Electric Jiffy® Power Ice Drills, you will have a 1 year warranty on your Battery.  If you have a problem with a Tecumseh engine, refer to the nearest Authorized Tecumseh Service Center by calling 1-800-558-5402. For all other repairs take the drill to an Authorized Jiffy Service Dealer.  For additional information regarding warranty, go to our website www.jiffyonice.com

Jiffy® D-Ice'r ARMOR™ is a coating that is Jiffy's exclusive ice shedding protection against ice buildup.  Even in the coldest conditions, ice can form, but it can't stick to the Jiffy® D-Ice'r ARMOR™.  The D-Ice'r ARMOR™ is on the drill head (bottom) preventing power-robbing ice buildup for a fast, clean cutting performance.

The serrated Jiffy® RIPPER BLADE™ with the serrations provides 15% faster and smoother cutting to the Jiffy® chipper tooth blade design.  The combination of Jiffy® D-Ice'r ARMOR™ on the bottom end of the drill and the RIPPER BLADE™ provide the best combination of fast cutting and resistance to ice buildup, hole after hole.
 

No, it will not work.  Only Jiffy® Power Ice Drills use high-speed, single reduction gearboxes.  These gearboxes turn the ice drills counter-clockwise.  All other drills turn clockwise.
 

Jiffy® Power Ice Drills are ideal for initial drilling & re-drilling of holes.  This has been done for years.
 

No, ALL Jiffy® Power Ice Drills use the same high-speed gearbox containing hardened steel gears.  The Jiffy® Power Ice Drill gearbox is a single stage design with a 12:1, 15:1, or 24:1 gear ratio.
 

The drill assembly will be turning at approximately 238 RPM when using a 24:1 Planetary Transmission. 
The drill assembly will be turning at approximately 380 RPM when using a 15:1 Planetary Transmission. 

The engine RPM is approximately 5700 RPM.

The Throttle Handle side of your E6 Lightning should have 2 switches on the Throttle Handle itself.  Both of these switches should be marked with a sticker showing what they are used for. You will see that one of the stickers shows a FWD and an RVS.  This switch will allow you to go back and forth between forward and reverse drilling operations. 

The weight of the E6 Lightning units are approximately 24 to 27 pounds depending on drill assembly size.
 

The E6 Lightning is powered by a 6 Amp-Hour Lithium Ion Battery. 

The following Table shows the average # of holes that can be drilled on a single Battery Charge:
 

The E6 Lightning contains a High Torque 40 Volt DC Brushless pancake motor. 

Jiffy® E6 Lightning, Battery Powered Ice Drills are only available through our authorized U.S. retail outlets.  See www.jiffyonice.com for a listing of sales dealers.  Currently unavailable outside the U.S. or online.
 

Feldmann engineers, manufactures and assembles Jiffy® Ice Fishing products in Sheboygan Falls, WI.