Jiffy On Ice
Welcome to Jiffy On Ice
Search
icon

(800) 344-0712
Theme:
Cold Starting Procedure for Jiffy 2500 and 3500 Series Engines
  SEE OWNER'S MANUAL FOR SAFETY AND OPERATING INSTRUCTIONS
Mix one gallon of Fresh Winter Blend regular gasoline with on container of Jiffy 2-cycle oil.  Use this fuel blend to fill tank to 3/4 full.Press primer bulb until clear gs (return)line is free of bubbles.

  1. Move rocker switch to ON or (I) position.
  2. Move choke lever to FULL CHOKE or (I\I) position. (Operator's left)
  3. Depress throttle control with left hand and grasp the starter handle in your right hand.
  4. Slowly pull starter handle until you feel resistance from engine, then pull vigorously.
  5. Without releasing the starter handle or the throttle control, let handle return to original position and repeat step 5.
  6. If engine doesn't start after 5-6 pulls, press the primer bulb 2-3 times and repeat with steps 5-6.
  7. After engine starts running, move choke lever to HALF CHOKE position until engine runs smoothly.
  8. Move choke lever to RUN or (III) position. (Operator's right)
  9. To stop engine, push rocker switch tot OFF or (0) position

SPECIAL NOTE:  If the engine does not start due to extreme cold temperatures, move unit to warm environment, remove spark plug and wipe off excess fuel, replace spark plug and repeat steps 1-9.